Build Your Own Clone Message Board
It is currently Tue May 21, 2013 3:45 am

View unanswered posts | View active topics


Board index » Build Your Own Clone » Sourcing parts

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Previous topic | Next topic 
Author Message
geekmacdaddy
 Post subject: Piece of Sh%t
PostPosted: Thu May 03, 2012 7:19 am 
Offline
Moderator
User avatar

Joined: Sat Mar 11, 2006 12:49 am
Posts: 6099
Location: New Yawk, NY
Can anyone suggest something that isn't imported crap? and that goes for leads for my Fluke MM as well. Thanks


Attachments:
IMG_2806.JPG
IMG_2806.JPG [ 71.75 KB | Viewed 659 times ]

_________________
GrindCustoms wrote:
i went over abusive...just like i like it :mrgreen:
Top
 Profile  
 
Stephen
 Post subject: Re: Piece of Sh%t
PostPosted: Thu May 03, 2012 8:49 am 
Offline
Moderator
User avatar

Joined: Sat Mar 04, 2006 9:15 pm
Posts: 6127
Location: Ohio
Cutters
http://www.mcmelectronics.com/product/22-14440

http://www.mcmelectronics.com/product/22-14436

http://www.mcmelectronics.com/product/22-10670

Leads
http://www.mcmelectronics.com/product/201-089

http://www.mcmelectronics.com/product/F ... 5-/105-012

http://www.mcmelectronics.com/product/F ... 1-/105-454

_________________
Assume NOTHING.
Image
Have you hugged your dog today?
R.I.P. Chibi I miss you puppy.

Top
 Profile  
 
tonedeaf
 Post subject: Re: Piece of Sh%t
PostPosted: Thu May 03, 2012 9:31 am 
Offline
Moderator
User avatar

Joined: Tue Sep 12, 2006 10:36 am
Posts: 9995
Location: Attleboro, MA
damnz geek - I use nothing but crappy import cutters (harbor freight, and Chinese imported craftsman branded stuff), and while they're not by any stretch the best cutters out there, I've never broken them!

_________________
GrindCustoms wrote:
Clean inside, dirty outside is how like i like 'em! :mrgreen:
µ

Top
 Profile  
 
duhvoodooman
 Post subject: Re: Piece of Sh%t
PostPosted: Thu May 03, 2012 9:36 am 
Offline
Moderator
User avatar

Joined: Tue Jan 02, 2007 1:24 pm
Posts: 6309
Location: Albany, NY
tonedeaf wrote:
I use nothing but crappy import cutters (harbor freight, and Chinese imported craftsman branded stuff), and while they're not by any stretch the best cutters out there, I've never broken them!

But the Geek has a grip of steel from all those years of gigging with Strats! ;)

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2

Top
 Profile  
 
geekmacdaddy
 Post subject: Re: Piece of Sh%t
PostPosted: Thu May 03, 2012 9:36 am 
Offline
Moderator
User avatar

Joined: Sat Mar 11, 2006 12:49 am
Posts: 6099
Location: New Yawk, NY
tonedeaf wrote:
damnz geek - I use nothing but crappy import cutters (harbor freight, and Chinese imported craftsman branded stuff), and while they're not by any stretch the best cutters out there, I've never broken them!



Do you listen to Pantera when you build? :twisted: :twisted: :twisted:

_________________
GrindCustoms wrote:
i went over abusive...just like i like it :mrgreen:

Top
 Profile  
 
tonedeaf
 Post subject: Re: Piece of Sh%t
PostPosted: Thu May 03, 2012 9:46 am 
Offline
Moderator
User avatar

Joined: Tue Sep 12, 2006 10:36 am
Posts: 9995
Location: Attleboro, MA
haha - both of you. No Pantera while building, and no years of gigging with strats and wrestling with the neck. that must be it!

_________________
GrindCustoms wrote:
Clean inside, dirty outside is how like i like 'em! :mrgreen:
µ

Top
 Profile  
 
defaced
 Post subject: Re: Piece of Sh%t
PostPosted: Thu May 03, 2012 8:59 pm 
Offline
User avatar

Joined: Wed Dec 03, 2008 11:41 am
Posts: 1783
Location: York, PA
I had the same thing happen to two side cutters I got from Harbor Freight that I modified into flush cutters. I ended up going to Rat Shack and picking up what they had there. Not the best, I'd prefer ones with a sharper edge, but they get the job done.

_________________
-Mike
Trust, but verify. - Oller

Top
 Profile  
 
Bruce R
 Post subject: Re: Piece of Sh%t
PostPosted: Wed May 09, 2012 2:49 pm 
Offline

Joined: Fri Aug 19, 2011 9:30 am
Posts: 319
Location: Maryland
http://www.amazon.com/gp/product/B000IB ... 00_s00_i00

I have a pair of these, and they work pretty well. I don't know how you snapped that off, but I have not had the issue with these.
Top
 Profile  
 
JohnL
 Post subject: Re: Piece of Sh%t
PostPosted: Wed May 09, 2012 3:04 pm 
Offline
User avatar

Joined: Sat Feb 28, 2009 9:03 am
Posts: 461
Location: Middle of nowhere Va.
Believe it or not I have had good luck with the Kobalt brand cutters from Lowes.
Top
 Profile  
 
CaptainPeyote
 Post subject: Re: Piece of Sh%t
PostPosted: Wed May 09, 2012 3:13 pm 
Offline
User avatar

Joined: Fri Sep 11, 2009 9:42 pm
Posts: 4019
Location: Brewtown, USA
+1 on the Kobalt ones. I've got two sets. The pliers they come with are great, and the clippers hold the cutoff piece until you let go - really handy.

_________________
baj2k wrote:
use the copper brillo pad to rough up the "scrote" to ensure good contact

Top
 Profile  
 
Comfort Player
 Post subject: Re: Piece of Sh%t
PostPosted: Wed May 09, 2012 3:21 pm 
Offline
User avatar

Joined: Tue Dec 28, 2010 6:38 pm
Posts: 1436
Location: Sunny Central Oregon
I just use really small dikes :shock:


Image

_________________
I wrote:
If my investments work out I should be able to retire at my funeral.

Last edited by Comfort Player on Wed May 09, 2012 3:56 pm, edited 1 time in total.

Top
 Profile  
 
TNblueshawk
 Post subject: Re: Piece of Sh%t
PostPosted: Wed May 09, 2012 3:29 pm 
Offline
User avatar

Joined: Tue Feb 07, 2012 3:18 pm
Posts: 5312
Location: Nashville, TN
Comfort Player wrote:
I just use really small dikes :shock:


Image


You are in the wrong thread. I think you meant to post in the Lava cable thread :lol:

_________________
powerpopguy wrote:
warm places theory sounds plausible. Occasionally, I wake up and think my snake is missing too, but it turns out it's just a chilly morning. :P


Top
 Profile  
 
drezdn
 Post subject: Re: Piece of Sh%t
PostPosted: Thu May 10, 2012 11:04 pm 
Offline
User avatar

Joined: Wed Oct 21, 2009 2:06 pm
Posts: 946
Location: Milwaukee
This is what I use. Note: The people from All-Spec are really nice, but they have minimum order requirements.

_________________
dcountry13 wrote:
First kid, first car, first love, first sex, first home and first Tele. How sweet it is!

Top
 Profile  
 
pickdropper
 Post subject: Re: Piece of Sh%t
PostPosted: Thu May 10, 2012 11:47 pm 
Offline
User avatar

Joined: Tue Feb 21, 2012 1:02 am
Posts: 1445
I've used many different types over the years.

Once I got a pair of these at work, it was all over:

http://www.techni-tool.com/272PL2432

Yes, they are VERY expensive. They are also fantastic and I use them a lot. A $5 set of side cutters can work just fine, but I appreciate the quality of these.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Build Your Own Clone » Sourcing parts

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group