Just a bunch of ideas

tonmann · **Joined:** Sat Apr 12, 2008 4:29 am **Posts:** 563

Tuesday's circuit is the Moloch:

There is no reverse side - five cuts and two jumpers.

tonmann · **Joined:** Sat Apr 12, 2008 4:29 am **Posts:** 563

The Saturn Five:

There is no reverse for this one - three cuts and three jumpers

tonmann · **Joined:** Sat Apr 12, 2008 4:29 am **Posts:** 563

Next on the list - Skank Fuzz:

And the reverse:

tonmann · **Joined:** Sat Apr 12, 2008 4:29 am **Posts:** 563

THE LAST ONE !!!!!!!!!

The Ultralord:

And the reverse:

Pleas note the emitter resistor for Q2 is labeled R1 on the schematic, I've re-named this resistor R10.

tonedeaf · **Posted:** Tue Sep 22, 2009 7:41 am

Now I need to put in an order for some vero. At the least I need to breadboard a few of these and see where to get started... DF and Tonman - thanks again for all you do for DIY!!!

JohnL · **Posted:** Tue Sep 22, 2009 7:58 am

Thanks to both Dragonfly and Tonmann to help me learn about transferring circuit diagrams to vero and basic circuit design. This has been very helpful to me. Now to build that Dragon #2....

John

crbmoa · **Posted:** Tue Sep 22, 2009 9:38 am

tonedeaf wrote:

Now I need to put in an order for some vero. At the least I need to breadboard a few of these and see where to get started... DF and Tonman - thanks again for all you do for DIY!!!

Group Buy on Vero?

J/K.

Ditto. Mega thanks. This is the kind of thread I print out and read over and over again. You guys are awesome!

tonedeaf · **Posted:** Tue Sep 22, 2009 12:01 pm

crbmoa wrote:

Group Buy on Vero?

J/K.

Seriously, if we could find a volume discount on the stuff, I'd be down. I only know of one or two places to buy it, and the one I'm most familiar with (the DIY stomp store, which gets it from SB) doesn't offer a volume discount.

OOOH! I just looked - futurlec does carry it (that was the other one I was thinking of) and does offer volume discounts on as little as 25 of them. Here's the size/price breakdown:

Stripboard - Large (Board Dimensions: 110x94mm - 4.33x3.70in)
Qty US$ (each)
1 + $1.95
25 + $1.85
100 + $1.75

Stripboard - Small (Board Dimensions: 94x53mm - 3.70x2.08in)
Qty US$ (each)
1 + $0.95
25 + $0.88
100 + $0.82

crbmoa · **Posted:** Tue Sep 22, 2009 12:15 pm

Iis that gonna be worth it? I just haven't bought any myself, so I don't know about shipping.

If we get a huge order shipped to MA ( :wink:

), would it be cost effective to send small packages around the country?

tonedeaf · **Posted:** Tue Sep 22, 2009 12:48 pm

crbmoa wrote:

Iis that gonna be worth it? I just haven't bought any myself, so I don't know about shipping.

If we get a huge order shipped to MA ( :wink:

), would it be cost effective to send small packages around the country?

Not sure if it's going to be worth it, but it is considerably less money than the DIY stompboxes store - theirs is $2.50 (they only have the larger size I think).

crbmoa · **Posted:** Tue Sep 22, 2009 2:37 pm

Well, I'm all for herd purchasing. Reduces my carbon footprint! :wink:

Maybe we should start another thread, like Wicker did recently, just to gauge interest.

If no one else bites, maybe you and I will just work up a decent sized order and split that?!

tonedeaf · **Posted:** Tue Sep 22, 2009 3:53 pm

I'm definitely down. As a matter of fact....

http://buildyourownclone.com/board/viewtopic.php?f=7&t=20678

kaycee · **Posted:** Wed Sep 23, 2009 1:55 am

Thanks Tonman

I've saved all of these and look forward to finding the time to build some

tonmann · **Joined:** Sat Apr 12, 2008 4:29 am **Posts:** 563

Thanks to all of you for the kind comments and an extra thank you to Dragonfly for providing the circuits/schematics.

candletears7 · **Posted:** Fri Sep 25, 2009 5:21 pm

Dragonfly and Tonmann...
The work and inspiration you guys provide is the coolest. You guys gotta know how appreciated it is!

rastro · **Posted:** Tue Oct 06, 2009 8:06 am

I know that the Dirty Sanchez and Ultra Lord are now production units, but does anyone have the other schematics for these projects? They seem to be deleted.

tonedeaf · **Posted:** Tue Oct 06, 2009 8:48 am

rastro wrote:

I know that the Dirty Sanchez and Ultra Lord are now production units, but does anyone have the other schematics for these projects? They seem to be deleted.

Not sure what you mean by 'production units', but I can see all the schematics on page one of this thread.

rastro · **Posted:** Tue Oct 06, 2009 9:07 am

Hmm, I'll try to refresh the page. I am not seeing the pics.

By production units, I meant that the Dirty Sanchez and Ultra Lord went into production and were being sold by Tone Factor (I think), therefore the schematics were pulled elsewhere.

Thanks!

tonedeaf · **Posted:** Tue Oct 06, 2009 9:33 am

rastro wrote:

Hmm, I'll try to refresh the page. I am not seeing the pics.

By production units, I meant that the Dirty Sanchez and Ultra Lord went into production and were being sold by Tone Factor (I think), therefore the schematics were pulled elsewhere.

Thanks!

Wow - I had no idea. I thought these were DIY specials.

Might be something in your cookie settings?

edit - AHA I see:

Quote:

Dano drew up the DS and UL schematics...hopefully he won't mind my posting them.

rastro · **Posted:** Tue Oct 06, 2009 9:53 am

Ahh, I just realized it was one of my security programs blocking the images. I see them now.

Thanks, Tonedeaf!!!

Build Your Own Clone Message Board

Just a bunch of ideas

Who is online