Build Your Own Clone Message Board

It fired up first time! I was SO excited. Now, I have a dilema, of sorts, and I'm just looking for some opinions on where to start. I need to find a spot for it in the signal chain. Here's my current order from the guitar:
->5kComp -> Crybaby -> Phase 90 -> Mighty Mouse -> Ping Pong Delay -> CE3 Chorus -> GGG LPB-1 Clone -> Amp

This setup mostly works for me, and I've got the Crybaby on a bypass looper. When I'm feeling frisky, I'll move the delay, chorus, and LPB-1 to the effects loop on my HR DeVille. What my band plays is Classic Rock style, with little forays into Hard Rock and the edge of Metal (on a couple of originals).

Also, I've modded the Phase 90 and CE 3, and replaced the Wah pot in the Crybaby, so the only thing stock-bought on my board is my tuner (which is kept out of way in it's own loop).

So, opine away, friends.

I would try it right after the comp, and then move it to right after the Phase 90 - basically to see whether it sounds good before or after the wah. I've had better luck with before the wah, but YMMV.

I'd put it on one side or the other of the Mighty Mouse, but this is a very subjective judgment. I'd also put the delay after the chorus and move the phaser to where the delay is currently, but go with what sounds best to you....