Octave Fuzz = LED and Bypass works. No Effect.

jasonson · **Joined:** Sat Mar 17, 2012 8:51 pm **Posts:** 5

I finished building the Octave fuzz last night. The bypass signal works and the LED will turn on an off. When the effect is engaged there is no sound. If I turn the volume knob on the right all the way up it will make a "farty noise", but a slight turn down from being dimed and it makes not sound. When it makes the fart noise, the knob on the left will adjust the volume. I am going to try to reflow the solder tonight. And I will post pics the first chance I get.

Any ideas would be great.

Thanks.

jasonson · **Joined:** Sat Mar 17, 2012 8:51 pm **Posts:** 5

I just figured out that I have the pots swapped. I am going to change them and try again.

jasonson · **Joined:** Sat Mar 17, 2012 8:51 pm **Posts:** 5

it was the pots. All is working well now. It sounds shitty like fuzz should. :lol:

Build Your Own Clone Message Board

Octave Fuzz = LED and Bypass works. No Effect.

Who is online