Build Your Own Clone Message Board

I've attempted to make the Octave Fuzz model.
I believe I've gotten all my components on the board on correctly, my remaining issues are whether the jacks and the foot switch wiring is correct.
My led doesn't come on when battery is attached and switch is activated. Not sure if the issues are if my circuits are in there correct places or what.
Any insights would be helpful and much appreciated.

Images attached.

Thanks-

The soldering of the jacks look very cold. The Sleeve lug of the input jack doesn't look like it was soldered. I can't tell if the adapter jack is wired correctly in these photos. Pull the PCB from the enclosure and snap a few more pix so we can confirm the adapter's wiring.